GP200B · MW-WP/UP(200-800)
A Wall and Floor Printer That Prints Both Surfaces in One Visit
The GP200B is the wall and floor printer in the WallPrintJet range, built for advertising companies and commercial project teams who sell a printed wall and a printed floor on the same site.
It prints the wall, turns its printhead down to the floor in 2 minutes without moving the rails, and prints the floor in front of it: one machine, one crew, one trip.
It takes Epson DX10, DX7, I1600 or I3200 printheads, prints 2.5 m high on walls as standard, and packs down to 40 cm tall for the car.
2min
Wall to floor
Head turns, rails stay put
- 2 minfrom wall to floor
- 2.3 mfloor print width on a 3 m rail
- 40 cmtall for transport
- 60 kgnet machine weight
Who it is for
Four Businesses That Buy the GP200B Wall and Floor Printer
The GP200B is for businesses whose quotations carry a floor line as well as a wall line, at the same address.
-
Advertising and sign companiesBrand wall behind the counter, graphic on the floor in front
Clients want a brand wall and a floor graphic, a printed walkway in a mall or a logo on the floor of an event stand. Both pieces come from the artwork your studio already prepares, printed by one machine on one visit.- Brand wallWall line
- Floor logo or walkwayFloor line
-
Commercial space projectsFeature walls and floor zones on one schedule
Fit-out teams on shops, showrooms, hotel lobbies, offices, schools and play areas price feature walls and floor zones together. The GP200B stands on one rail along the wall, prints the wall, then prints the floor zone from the same position.- Feature wallWall line
- Floor zoneFloor line
-
Wall printing businessesFloors on your price list without a second machine
You already sell printed walls. The GP200B runs the same software, ink and print modes on both surfaces, so your operator adds floor work to what they already know.- Walls you sell todayWall line
- New floor workFloor line
-
Operators who drive to siteUpright in a car boot, not lying flat
With the upright rail removed the GP200B stands 40 cm tall, so it travels upright in a car boot or a small van.- Transport height40 cm
- Control box, carried by hand10 kg
Need walls only? The four machines in the range are compared side by side on the Wall Printers page, and the lightest of them is the GP200 rail wall printer.
Specifications
GP200B Wall and Floor Printer Specifications
| Print area | |
|---|---|
| Model code on the spec sheet | MW-WP/UP(200-800) |
| Surfaces | Walls and floors on one machine |
| Wall print size | 2.5 m high standard; width extends by joining rail sections |
| Floor rail | 3 m wide, prints floor areas up to 2.3 m wide |
| Wall to floor switch | About 2 minutes, rails stay in place |
| Unprinted margin on walls | Top 20 cm, bottom 50 cm, left 15 cm, right 40 cm |
| Printheads, ink and output | |
| Printheads | Epson DX10, DX7, I1600 or I3200 |
| Ink | Wall UV ink, CMYK or CMYK + W |
| Ink droplet | 3.0 pl |
| Precision (spec sheet) | 2880 dpi |
| Speed | Draft 8 m²/h, Standard 8 m²/h, High resolution 5 m²/h |
| Curing | LED UV lamp, temperature and intensity adjustable |
| Drive and base | |
| Drive | Floor rail with belt drive, servo motors |
| Base | Wheels or rails |
| Software and files | |
| Data interface | USB 3.0 |
| RIP software | Maintop (Windows 10) or Ultraprint |
| Image files | 300 dpi or higher, CMYK; TIFF, PDF, JPEG or PNG |
| Power, transport and warranty | |
| Power | Single-phase AC 110-220 V, 2000 W, 50/60 Hz |
| Working environment | 10-35 °C, wind up to force 5 |
| Control box | 10 kg, carried by hand |
| Transport height | 40 cm with the upright rail removed |
| Weight | 45 kg without parts, 60 kg net, 120 kg packed |
| Warranty | 2 years on the machine from the date of purchase |
Key features
Eight Features of the GP200B Wall and Floor Printer
The first four make up the fold-and-turn build no other series in the range has. The last four are shared by all four series, shown here on the GP200B.
-
Folding, extending printhead
The printhead unit folds, rotates and extends. The same mechanism that turns it toward the floor tucks it against the body for transport and reaches further out for printing. -
Folding upright rail
The upright rail folds and comes off, leaving a machine 40 cm tall that one person stands on end in the vehicle. It also travels in a pull-along flight case. -
Hand-carried control box, split rail, aviation plugs
The 10 kg control box travels separately, the floor rail comes apart into sections that stack in the boot, and every cable locks in with an aviation plug that holds while printing and parts quickly when you pack up. -
Belt-driven floor rail, servo motors
The machine moves along a belt-driven floor rail on servo motors. The rail carries a higher load and keeps its height over long use, so the carriage stays on line pass after pass. -
Ink level alarm and white ink stirring
A warning before any ink runs low, and white ink kept moving so it does not settle in the lines. -
Electric ink suction, heated printheads
Draws ink faster than a hand pump and caps a DX10 head overnight; heating holds the heads at working temperature. -
Adjustable UV lamp
Temperature and intensity knobs match curing to the surface, which matters when one visit moves from wall paint to a coated floor. -
Dual ultrasonic sensing, touchscreen control
Two sensors move the head in and out on uneven surfaces; the basic print workflow on the HD touchscreen takes about 10 minutes to learn.
Unique configuration
Three Parts Only the GP200B Has
Three parts of the GP200B build belong to this machine alone in our range: the 2-minute switch, the floor rail and the patented body.
Wall to floor in 2 minutes, rails in place
Nothing is lifted, relaid or levelled again. The software, ink and print modes are the same in both positions.- StaysFloor rail, laid along the foot of the wall
- StaysUpright, on the machine
- StaysCables, plugged in
- MovesPrinthead, from facing the wall to facing the floor
3 m floor rail for floors up to 2.3 m wide
For floor printing the GP200B runs on a 3 m wide floor rail and prints a floor area up to 2.3 m wide inside it. Floor results depend on the material and its finish: a smooth floor takes a coating before printing, and we recommend a test print on the client's actual floor before you quote the job.Registered design patent on the body
The shape of the GP200B body is registered as a China design patent. It protects the appearance of the machine, so the GP200B on your client's site has a body of its own, and the certificate comes with the quotation on request.
- Patent number
- ZL 2024 3 0255771.X
- Granted
- 2024-12-17
- Holder
- MAXWAVE
- Protects
- The appearance of the machine body
Options
GP200B Options: Printhead, Height, Power and Extras
Choose one printhead, then tick the extras your work needs. Prices for each option come with the quotation.
Printhead
-
DX10
The lowest-cost head, also sold as the TX800, with 1080 nozzles and 720 × 1080 default resolution. -
DX7
1440 nozzles, sitting between the DX10 and the I1600 on speed, life and clog resistance. -
I1600
An original Epson head with 1600 nozzles and larger openings that resist clogging, fire steadily through long wall-and-floor sessions and purge air in one pass. -
I3200 Top head
The top head for the GP200B, printing at 720 × 1200 by default.
Build and extras
-
3 m height or a custom build to 4 m
For walls above the standard 2.5 m print height, the machine is built 3 m high or custom-built up to 4 m. -
UPS power
A UPS added to the machine keeps it printing through a power cut instead of stopping mid-image. -
Your logo on the machine
Your brand goes on the body, so clients see it while it prints their wall and floor.
-
WiFi image transfer
The operator sends wall and floor files from a laptop without running a cable to the machine. -
Chinese, English or Russian software
The control software is set to the language your operator works in. -
CMYK + W white ink
Adds a white underbase for dark walls, so colours print true on dark backgrounds. More on the white ink wall printer page.
Quotation checklist
Six Details for a GP200B Quotation
Send these details and the reply names the GP200B printhead, ink setup and options we recommend, with a quotation for that configuration.
Wall heights
The height of the walls you print most and the highest one, to set a 2.5 m, 3 m or custom build.Floor areas
The width of the floor areas you print, the floor materials and roughly how much of your work is floors, to confirm they fit the 2.3 m print width.Volume
The area you expect to print each month and how much fine detail your designs carry, to set the printhead.Surface colours
Whether you print on dark walls, which call for CMYK + W.Options
Your logo, a UPS, WiFi and the software language you need.Destination
The country the machine ships to.
Setup training and after-sales support are covered on the Training and Support page.
GP200B quote
Get Your GP200B Recommendation and Quotation
Send your wall heights, the floor widths you print and roughly how your work splits between walls and floors. The reply names the GP200B printhead setup and ink setup we recommend, plus a quotation.
- Your details reach the sales team the moment you press send.
- The recommendation names one printhead setup, one ink setup and the build height.
- Prices for each option you tick come with the quotation.
Email [email protected]
WhatsApp +86 15327155363